Laboratory

Investigations & Measurements

IonicContamination
  • Check soldering joints
  • Intermetallics size
  • Internal component construction
  • Validation of reflow profile
  • Quality alert analysis
  • Check contamination level of PCBA
  • SMD  / soldering wave follow up
  • PCB incoming inspection
  • Check contamination level of PCBA in small  areas (flux residues…)
  • Trace IR spectrum
  • Comparison with a database of 80 000 spectrums
  • Identify origin of organic residues
  • Check resistance of solder joints
  • Quantify fragility of solder joints due to voids
  • Check wettability of components
  • Validation of old batch
  • Quality alert
  • Monitor and evaluate the contamination level of white and grey rooms
  • Suitable for smd, silkscreen areas..
Equipement Engineered by BeLink
  • Run the body controlers with real inputs / outputs of the vehicle : lights, clusters, wipers… .
  • Simulate electrical power charge
– Automatic on/off sequences monitoring.
  • Signal measurements
  • Micro controlor signals analysis
  • Failure investigations
  • Radio signal analysis
  • Confirm if the component fits with its spec
  • Measurement of sensitive components  :  
  • l chemical capacitors
  • l small ceramic capacitors 
  • l inductors
  • Visualize microscopic issues : defective vias in PCB, metalic fibers, debris
  • Take best in class pictures
  • Measurement  of the max bending of the pcb at sensitive locations : ceramic, capacitor..
  • Check that the value fits with the standard at any locations where PCBA is potentially damage : testing devices…
  • Avoid broken components